19
7.1.4.3 Video Analysis
7.1.4.3.1 Video Analysis
– Scene Setup
Figure 11: Intelligent
– Video Analyse – Scene Setup
Step 1. Add Lane to table
Step 2. Add Region for recognition
Step 3. Add Lane line
– Lane should be fit to devices you want to recognize, not to street.
Step 4. Add Detect line
– This is the line where the picture of plate is taken.
Step 5. Set expected Direction of vehicle movement.
Step 6. Save and test settings.
Notes:
To modify setup,
press “Redraw” or “Edit”
Take time to do and test the setup at day and nighttime to get the best result.
Plate best width range is 120~280.
If you want to modify, go to Setup >ITC >Intelligent >Video Analysis >Recognition.
Parameter
Note
Region
Set region to delete. Region is within red line.
Detect
Draw detect line of trigger of snapshot.
Detect line is green.
Region
Set region area. In this area, it will identify vehicle plate.
