User manual
SNC-211RSIA, SNC-311FSNF
_________________________________________________________________________________
- 38 -
4.2 Setup
Camera
Video
4.2.1 Setup
Camera
Video
Video
Here you can adjust the settings for the main stream and the sub stream.
Code stream type:
The camera supports the active control of frame rates, i.e. it allows you to record in different
frame rates.
You can choose from “General”, “Alarm” and “Motion”. During normal operations
(General), you record at l
ow frame rates and during events („Motion“) you record at higher
frame rates.
Encode mode:
Here you can select from H.264, H.264H and MJPEG.
Resolution:
Select the resolution which is most appropriate for you.
Frame rate (FPS):
Select the frame rate which is most appropriate for you.
Bit rate type:
Select between CBR and VBR. If you chose MJPEG as encode mode, only CBR is available.
For CBR, the bit rate is constant whereas it is variable for VBR (1-6).
I-frame interval:
Here you can set the P frame amount between two I-frames. It is recommended to chose a
value which is twice as high as the general frame rate.
