Bedienungsanleitung / User Manual
SLS-1045D
_________________________________________________________________________________
- 39 -
4. Self-diagnosis
If there is no image, the self-diagnosis screen will be displayed. The self-diagnosis function
checks if the status of the monitor screen is
„No Signal“, „Out of Range“ and „Power off“
message.
A “No Signal” screen is displayed when the D-sub signal connector is connected but the
status of the monitor is on DPMS mode.
A „Out of Range“ screen is displayed when the applied frequency is under or over normal
range.
Normal range (non-interlaced mode only):
H: 30 to 80 kHz
V: 56 to 77 Hz
Press any key to cancel.
The monitor is turned off when it did not receive any signal from remote control or any button
within the time that you set up.
