Bedienungsanleitung / User Manual
SLS-1045D
_________________________________________________________________________________
- 31 -
3. Monitor settings via the OSD menu
Connect the monitor. If the monitor was in standby mode before, you can use the power
button on the remote control to switch it on.
Press the MENU button on the monitor or on the remote control to call-up the OSD menu.
Use the UP/DOWN buttons to scroll through the main menu.
Use the LEFT/RIGHT buttons to select a sub-menu item.
Press the SOURCE button and then the LEFT/RIGHT buttons to make adjustments as
necessary.
Press the MENU button again to exit the OSD menu.
Monitor settings via „hot keys“:
Some monitor settings can be made without calling up the OSD menu, i.e.
by using the „hot
key“ buttons:
SOURCE button: Select the input signal.
UP button: Best possible setting.
LEFT/RIGHT button: Adjust the volume.
MENU button: Press and hold the MENU button for approx. 5 seconds to lock/unlock
the control keys.
Overview of OSD main menu:
The OSD menu consists of the following 4 main menu items:
1. Picture (see chapter 3.1)
2. Sound (see chapter 3.2)
3. System (see chapter 3.3)
4. Lock (see chapter 3.4)
On the following pages, these menu items will be explained further.
