Bedienungsanleitung / User manual IR-12DX
_________________________________________________________________________________
- 12 -
4. Camera adjustments
(
Note: The camera is not included in the delivery!)
You should always adjust the aperture on site. In order to achieve utmost picture sharpness,
flange back and focus adjustments has to be done on site during darkness and with fully
opened aperture. If you use an illuminator with twilight switch, make sure to install it in the
correct position, i.e. bracket at the bottom, because otherwise interferences of the circuit time
may occur.
5. Installation
Note: If the illuminator is to operate permanently, please attach the included black sticker to
the front cover of the IR-illuminator so that the sensor is covered.
Installation with wall bracket WBJF:
To fix the illuminator onto the (optionally available) wall bracket WBJF, please use the
screws included with the illuminator and the washers included with the wall bracket delivery.
