Bedienungsanleitung / User manual IR-12DX
_________________________________________________________________________________
- 13 -
6. Technical specifications
IR LED illuminator
IR-12DX
Wavelength
950 nm
Angle (IR illumination angle,
horizontal)
40°
Range
Up to 20 m
Twilight switch
Sensor-controlled, 40/140 lux
(values for switching on/off)
Sensor
Protected by IR-filter against self-irradiation.
In case of sensor failure: switching to continuous
operation.
Switching to continuous light
By sensor
Power supply
Integrated switch-mode power supply unit with soft
start
Power supply effectiveness
80% (cos Phi >0.8)
Temperature-depending
switch-off
In case of a system temperature of >60°
the voltage supply is reduced.
Warming by surrounding
temperature
Max. 35°C
Housing ventilation
By venting membrane
Connection
2 m flexible cable with open ends
Voltage
200-240 V AC
Power consumption
16 watt
Classification
IP 65
Operating temperature
-20°C to +50°C
Housing surface
Aluminium anodised with plastic cover
Colour
Black
Dimensions (WxHxD)
120 x 80 x 65 mm
Weight
1.1 kg
Installation
2 x threaded hole M5 (bottom)
Note:
The range of the built-in IR-LEDs strongly depend on the location and the surroundings.
Strongly absorbent surfaces, e.g. dark, rough structures (floor, lawn or asphalt) may lead to a
considerable reduction of the maximum range.
Subject to technical changes. Errors excepted.
