9
Santa-Fe-Products.com
Santa Fe Air Purifier Installation & Operation Instructions
TROUBLESHOOTING
If your air purifier is not working correctly, please check the table below.
Technical Specifications
1.
Input voltage: AC 120V
2.
Frequency: 60Hz
3.
Consumption power: 40W
4.
Applicable area: 46m²
5.
Noise level: ≤55dB
6.
CADR: 230CFM (390m³/H)
7.
Operating condition: Temperature: 10°~45°
8.
Humidity: ≤95%RH
Problem
Possible Reasons
Solution
No Power
Fault in power source
Switch on when the power source gets regular
Not Working
Plug improperly connected
Fault in electrical circuit
Unplug the unit and plug in again
Try using the unit at a different outlet
Unusual Noise
There may be a foreign object in the air purifier
Dirty filter
The filter plastic bag was not removed
Take to service center
Replace the filter
Remove bag from the filter
Summary of Contents for 4042780
Page 11: ...Santa Fe Products com...
