7
Santa-Fe-Products.com
Santa Fe Air Purifier Installation & Operation Instructions
FEATURES AND OPERATION
Display Turn Off Function: Press and hold the “Sleep” button for 2 seconds to turn off the
display and buttons, only the “Power” button will be lit at one-third brightness. Touching any
button will illuminate the display, at which point the buttons will function as usual. After 15
seconds without any operation, the display will turn off again. Press and hold the “Sleep”
button to exit display turn off function.
Filter Change
When air purifier reaches 3,000 working hours, the filter change indicator icon in the display
will flash red to remind user change filter until the filter is changed. After filter is changed, in
standby mode, press the “Speed” button two times, then hold this button for 2 seconds, filter
change indicator icon will flash quickly. Five seconds later the whole display flashes for a
second and then turn off to enter in standby mode indicating the filter change is complete.
Now, touch “Power” button to switch on the air purifier.
Note: 3,000 hours is calculated based on low speed. It will remind filter change less than
3,000 hours if the air purifier works in other speeds.
Protection
The air purifier has a protection function. When the filter cover is removed or not installed
well, the air purifier will automatic cut off.
Maintenance
After using the air purifier for an extended period, dust on the sensor will affect its sensitivity.
We suggest cleaning the unit every two months. But time can be shortened or extended
according to indoor environment.
Summary of Contents for 4042780
Page 11: ...Santa Fe Products com...
