ENGLISH
4
1. Install your rear derailleur and shifter
according to your manufacturer’s
instructions (not pictured).
2. Determine the correct length of cable
housing. Push one end of the housing into
the access port at the back end of the
seat stay until it exits the access port at the
front end of the seat stay.
Tip: Remove the grommet from the access
port at the front of the seat stay if it is
already installed. Use a pick to help guide
the cable housing out of the front
access port.
3. Install the grommet (see image for correct
shape) onto the cable housing and into the
access port of the seat stay.
Tip: use a flathead screwdriver to help
install the grommet.
REAR DERAILLEUR ROUTING