background image

34

NOTES:

• DO NOT ATTEMPT TO CLEAN THE VIDEO HEADS OR SERVICE THE UNIT BY REMOVING THE REAR COVER.
• Video heads may eventually wear out and should be replaced when they fail to produce clear pictures.
• To help prevent video head clogging, use only good quality VHS tapes. Discard worn out tapes.

Video head cleaning

Video head clogging

The video heads are the means by which the DVD/VCR reads the pic-
ture from the tape during playback. In the unlikely event that the heads
become dirty enough to be clogged, no picture will be played back. This
can easily be determined if, during playback of a known good tape,
there is good sound, but no picture (picture is extremely snowy). If this
is the case, have the DVD/VCR checked by qualified service personnel.

Good Picture

Snowy Picture

No subtitle

• Some discs have no subtitles.
• Subtitles are cleared. Press SUB TITLE.

Angle cannot be changed.

• Multi-angles are not recorded on the DVD disc.

• The function is prohibited with the unit or the disc.

 appears on the screen.

28,30

26

SYMPTOMS

POSSIBLE SOLUTIONS

PAGE

Problems and troubleshooting /

 Video head cleaning

No 4:3 (16:9) picture

• The setup does not match your TV.

No on-screen display

• Select Display On.

30

30

No surround sound

• The setup does not match your stereo system.

The unit or remote operation key is
not functioning.

• Turn off the unit and unplug the AC power cord for several minutes,

then replug it.

13

Playback does not start when the title
is selected.

• Check the Parental setup.

Audio soundtrack and/or subtitle
language is not changed when you
play back a DVD.

• Multilingual language is not recorded on the DVD disc.

29

30

 2D80401A[E](29-BACK)

4/27/04, 1:36 PM

34

Summary of Contents for VRDVD4001A





































Reviews: