16
You must set the date and time manually for Timer
Recordings, ON/OFF Timer and Daylight Saving Time if
the Auto Clock process did not set them correctly.
EXAMPLE:
Setting the clock to “8:30 AM”, 30th (SAT)
October, 2004.
1
Press
MENU
.
Press
or to select the
SYSTEM SETUP option, then
press
ENTER
.
2
Press
or to select the CLOCK
SET option, then press ENTER.
3
Press
or to set the month,
then press
ENTER
.
4
Set the day, year and time as in
step 3.
After setting the clock, date and time
starts functioning automatically.
NOTES:
• After a power failure or disconnection of the power plug,
the time display will be lost. In this case, set the present
time again if the Auto Clock did not set correctly.
• To move cursor backward, press the CANCEL button.
1
Press
MENU
.
Press
or
to select the CH
SETUP mode, then press
ENTER
.
This TV/VCR is equipped with a channel memory feature
which allows channels to skip up or down to the next
channel set into memory, skipping over unwanted
channels. Before selecting channels, they must be
programmed into the TV/VCR’s memory. In addition to
normal VHF and UHF channels, this TV/VCR can receive
up to 113 Cable TV channels. To use this TV/VCR with an
antenna, set the TV/CABLE menu option to the TV
mode. When shipped from the factory, this menu option
is in the CABLE mode.
Tuner setting
TV/CABLE selection
1
Press
MENU
.
Press
or to select the CH
SETUP mode, then press
ENTER
.
2
Press
or to select the ADD/
DELETE mode, then press
ENTER
.
3
Select the desired channel to be
memorized or deletedusing
TRK/
SET +
or
–
button, or using
Direct
Channel
Selection buttons (0-9)
,
or
CH
/
.
4
Press
ENTER
to select the ADD or DELETE.
If you select an unmemorized channel, the Channel
indication will be red. If you select the ADD mode, the
Channel indication changes from red to green and the
channel will be memorized. If you select a memorized
channel, the Channel indication will be green. If you
select the DELETE mode, the Channel indication
changes from green to red and the channel will be
deleted from the memory.
5
Press
MENU
until the MENU screen is cleared.
To add/delete channels
1
Press
MENU
.
Press
or to select the CH
SETUP mode, then press
ENTER
.
2
Press
or to select the AUTO
CH MEMORY mode, then press
ENTER
. The TV/VCR will begin memorizing all the
channels available in your area.
Channel numbers will remain red until auto memorizing is
complete.
3
Press
MENU
until the MENU screen is cleared.
4
Press
MENU
until the MENU screen is cleared.
2
Press
or to select the TV/
CABLE mode.
3
Press
ENTER
to select the TV or
CABLEmode.
The arrow indicates the selected
mode.
TV
- VHF/UHF channels
CABLE - CABLE TV channels
Automatic memory tuning
Noise elimination
When you don't want to receive a weak signal broad-
cast, the Blue back screen can be obtained by selecting
the NO NOISE BACKGROUND “ON”. When the unit is
shipped from the factory, the NO NOISE BACKGROUND
is set to the “ON”.
1
In the SYSTEM SETUP menu,
press
SET +
or
–
to select “ NO
NOISE BACKGROUND”.
2
Press
ENTER
to select the “ON”
position.
3
Press
VCR MENU
until the menu screen is cleared.
á ñ
〈
+/-/ENTER/MENU
〉
MENU
TIMER REC SET
AUTO REPEAT
ON
OFF
ON
OFF
SAP
CH SETUP
SYSTEM SETUP
á ñ
á ñ
á ñ
á ñ
á ñ
á ñ
CH 003
ADD
á0Ð9/+/Ð/ENTER/MENUñ
Manual clock setting
2D80401A[E](10-17)
4/27/04, 1:35 PM
16