Sansui HDPDP4250, Owner'S Manual

Page: 25 / 56

25
TV operation
NOTES:
If a channel with no broadcast is
selected, the sound will automatically
be muted.
It may take a few seconds for a digital
channel picture to appear on screen
after being selected.
•
•
1
To turn on the TV, press POWER .
2
Adjust the volume level by
pressing VOL + or – . The volume
level will be indicated on the
screen by white bars. As the
volume level increases, so do
the number of bars. If the volume
decreases, the number of white
bars also decreases.
VO LU M E 2 5
3
Set the TV/CABLE menu
option to the appropriate
position (see page 23).
TV - VHF/UHF channels
CABLE - CABLE TV channels
4
Press the Direct Channel
Selection (0 - 9, – ) buttons to
select the channel.
A N T
A B C D
CA B L E
1 2
TO SELECT ANALOG CHANNELS
1-9: Press 0 twice, then 1-9
as needed. Example, to
select channel 2, press
0 , 0 , 2 .
10-99: Press 0 , then the remaining 2 digits. Example, to
select channel 12, press 0 , 1 , 2 .
100-125: Press the 3 digits in order. Example, to select channel
120, press 1 , 2 , 0 .
TO SELECT DIGITAL CHANNELS
Press the first 3 digits, then press – , followed by the remaining
3 digits.
Example, to select channel 015-001, press 0 , 1 , 5 , – , 0 , 0 , 1 .
If a channel is selected with only audio content, “AUDIO
ONLY” will be displayed on the screen.
If a channel is selected with a weak digital signal, “DIGITAL
CHANNEL SIGNAL STRENGTH IS LOW” will be displayed
on the screen.
If a channel is selected to which you have not subscribed,
“DIGITAL CHANNEL IS SCRAMBLED” will be displayed on
the screen.
•
•
•
VHF/UHF/CABLE CHANNELS
TV CABLE
VHF
2-13
VHF
2-13
UHF
14-69
STD/HRC/IRC
14-36 (A) (W)
37-59 (AA) (WW)
60-85 (AAA) (ZZZ)
86-94 (86) (94)
95-99 (A-5) (A-1)
100-125 (100) (125)
01 (5A)
30L0401A.indb 25 30L0401A.indb 25 12/20/2006 10:54:16 AM 12/20/2006 10:54:16 AM