
15
Starting setup
The Starting Setup menu appears the first time
you turn on the TV, and assists you to select the
menu language, specify the Air/Cable setting,
and program your channels automatically.
IMPORTANT: Make sure that the antenna or cable
TV system connection is made!
1
To turn on the TV, press
POWER
(POWER
indicator on the front of the unit changes green.
It may take approx. 10 seconds for a picture to
appear on screen.). The starting setup function
begins. Press
ENTER
. Press
or
to select
your desired language.
Auto Setup
OSD Language
Please select your language:
English
Español
Français
2
Press
or
ENTER
, then press
or
to select
“Air” or “Cable”.
3
Press
or
ENTER
, then press
or
to select
“Scan”.
If you select “Skip Scan,” the Starting Setup stops
and changes to the normal screen.
4
Press
or
ENTER
, now the “Auto Setup” starts.
After the starting setup is completed, press
ENTER
or
RETURN
to exit Auto Setup menu.
• Depending on the reception condition, it may
take from 15 minutes to 30 minutes to complete
memorizing digital cable channels. Please be patient.
NOTE:
Press to return to the previous step.
If you press
RETURN
in the process of “Auto
Setup”, the Starting Setup stops and changes to the
normal screen.
When you make a menu selection, your changes
occur immediately. You do not have to press
RETURN
to see your changes.
When you are finished programming the menus,
press
ENTER
.
TV operation
1
To turn on the TV, press
POWER
.
(POWER indicator on the front of the unit
changes green. It may take approx. 10 seconds
for a picture to appear on screen.)
2
Adjust the volume level by pressing
VOL +
or
–
.
The volume level will be indicated on the screen
by blue bars. As the volume level increases, so do
the number of bars. If the volume decreases, the
number of blue bars also decreases.
3
Set the Signal Type option to the appropriate
position (see “Air/Cable selection” on page 19).
4
Press the
Direct Channel Selection (0
-
9,
–
)
buttons to select the channel.
(If you press only channel number, channel
selection will be delayed for a few seconds.)
•
•
•
•
TO SELECT ANALOG CHANNELS
1-9:
Press 1-9 as needed. Example, to select
channel 2, press
2
, then press
ENTER
.
10-99:
Press the 2 digits in order. Example,
to select channel 12, press
1
,
2
, then
press
ENTER
.
100-135: Press the 3 digits in order. Example, to
select channel 120, press
1
,
2
,
0
, then
press
ENTER
.
TO SELECT DIGITAL CHANNELS
Press the first 3 digits, then press the
–
button,
followed by the remaining number.
Example, to select channel 15-1, press
1
,
5
,
–
,
1
,
then press
ENTER
.
CHANNEL LIST
The Channel List shows a list of all receivable
programs.
Press
ENTER
to display the Channel List.
Press
or
to select the desired channel.
Press
ENTER
to display the selected channel.
If you press
ENTER
again, the Channel Details
that you selected now will appear.
If a channel is selected with only audio content,
“ Audio only ” will be displayed on the screen.
If a channel is selected with a weak digital
signal, “Digital channel signal strength is low”
will be displayed on the screen.
The same program may be available on either
an analog channel or a digital channel. You may
choose to watch either format.
If a channel is selected to which you have not
subscribed, “Scrambled” will be displayed on
the screen.
If a station being viewed stop broadcasting and
the TV is not operated, the TV will automatically
shut itself off after 15 minutes.
Channels not listed under the Channel List
cannot be changed using the
Direct Channel
Selection (0
-
9,
-
)
buttons.
•
•
•
•
•
VHF/UHF/CABLE CHANNELS
Air
Cable
VHF
2-13
VHF
2-13
UHF
14-69
STD/HRC/IRC
14-36 (A)
(W)
37-59 (AA)
(WW)
60-85 (AAA)
(ZZZ)
86-94 (86)
(94)
95-99 (A-5)
(A-1)
100-135 (100)
(135)
01 (4A)
NOTE:
If a channel with no broadcast is selected, the
sound will automatically be muted.
It may take a few seconds for a digital channel
picture to appear on screen after being selected.
To select the video input source
To view a signal from another device connected to
your LCD TV, such as a VCR player, press
INPUT
SELECT
, then press
/ , then press
ENTER
. You
can select TV, Video, Component or PC depending on
which input jacks you used to connect your devices.
Input Select
TV
Video
Component
PC
•
•
ENGLISH
38L0221A.indb 15
38L0221A.indb 15
8/4/09 9:43:43 AM
8/4/09 9:43:43 AM