15
14
E
n
g
li
sh
C
lEaning
In the course of normal use, food particles and minerals from the water bath
may collect on the Sansaire™ Immersion Circulator. We recommend regular
cleaning of the housing, impeller and heating coils.
1. Power off, unplug and remove the Sansaire™ Immersion Circulator
from the water bath. If the unit is hot wait for the unit to cool down.
2. Remove the power cord from the back of the unit.
3. Remove the clamp from the back of the unit.
4. Slide the back cover tab to release the back cover, exposing the im-
peller and heating coils. NOTE: The upper section of the Sansaire™
Immersion Circulator contains sensitive electronics and should never
come in contact with water.
5. While holding the unit upright, rinse under running water to remove
food particles and cool the coils if still warm.
6. If necessary, scrub the unit gently with a sponge or brush and a drop
of dishwashing liquid. Rinse the unit thoroughly, ensuring that water
does not enter the upper section.
7. Reinstall the back cover and clamp.
m
aintEnanCE
Summary of Contents for Immersion Circulator
Page 1: ...English ...
