11
10
E
n
g
li
sh
o
pEration
w
atEr
b
aths
The Sansaire™ Immersion Circulator is designed to attach to
many shapes and sizes of baths. When in use, the circulator
needs to be clamped to the wall vertically and securely. This
u
sEr
i
ntErfaCE
During regular operation, the primary user interface is the
power button to
turn the machine on and off
and the temperature ring to change the target
temperature.
The display, by default, shows the current temperature of the water. However,
when the temperature ring is turned or the power is turned on, the display
turns to showing the target temperature. Regular temperatures range from
40C (~105F) to 85C (185F). To view the target temperature at any point,
press the
target temperature button.
The display can be chosen to show temperature in Celsius or Fahrenheit by
pressing the
C/F button.
r
EsEtting
The Sansaire has a safety mech-
anism in case the water level
becomes too low and the heat-
prevents the machine from
accidental water exposure. The
bath should hold no more than
20 liters (about 21 quarts) of
water to ensure the water tem-
perature is kept uniform.
ing elements begin to overheat. This usually happens if the machine is turned
on for an extended period outside a water bath or the water level becomes
too low. If this happens , the display reads ‘RESET’. Let the heating element
cool and press the reset button on the back of the circulator to return normal
functionality.
Summary of Contents for Immersion Circulator
Page 1: ...English ...
