VERONA RS
02-2014
EN
Instructions for use and maintenance
16 / 29-EN
11.1 - DISPLAY
The display is a touch-screen; during normal operation
of the machine the following screen is shown, while
during programming the screens shown on the display
are described in the relevant paragraph.
The following information is displayed on the screen:
1)
Water level in the boiler
2)
Boiler temperature
3)
Unit temperature
4)
Operation description/alarms
5)
Day of the week
6)
Time
7)
Cup heating element on
12 - PROGRAMMING
The machine can be programmed on the display with
the Touch function.
12.1 - PROGRAMMING DOSES
The quantity of dispensing coffee can be programmed
for all buttons, except button (1)
which is used for
continuous dispensing.
WARNING: when the left button pan-
el is programmed, the programmed
doses are automatically transferred
to the other button panels.
•
The coffee doses can be customised for each dis-
pensing unit by repeating the operations performed
in the first unit on the left for each unit.
Programming coffee doses
Start the machine as described in the relevant para-
graph.
Program the doses as follows:
•
Fit the filter holder with coffee on the left unit of the
machine, as shown in the "OPERATION" paragraph.
•
Position a cup or two cups under the unit according
to the type of programming to be performed.
•
Press button (1).
for at least 5 seconds until
the relevant LED (2) turns on flashing; the following
message is shown on the display:
PROGRAMMING DOSES SELECT IN 30 sec
3
4
1
2
•
Within 30 seconds, press the dispensing button
to be programmed, e.g. button (3)
(single
espresso coffee).
While dispensing, the button LED (3)
remains
on, the other button LEDs turn off and the LED of
button (1)
flashes.
•
When the coffee reaches the desired quantity in
the cup, press button (3)
to stop dispensing;
the quantity of dispensed coffee for that button will
be stored, the button LED (3)
turns off while
the other LEDs of the buttons that still need to be
stored turn on.
•
If necessary, repeat the aforementioned opera-
tions to program the other buttons as well; after
30 seconds without using any button, the dose
programming stage will be quitted.
Programming tea doses
•
Enter the programming function as described for
the coffee, then when LED (2) of button (1)
turns on flashing, press button (4)
to start
dispensing hot water; when the desired quantity is
reached press button (4) again to stop dispensing.
•
After 30 seconds without using any button, the dose
programming stage will be quitted.
Max
Min
Wed
10 : 57
125
°c
SANREMO
92
°c
94
°c
1
4
2
3
3
5
6
7
