Sanremo Stardust SR64OD, Instruction Booklet

Page: 9 / 25

20
ENGLISH
SR64OD - SR83OD
• The grinder-doser must be placed
on a stable, flat surface.
• Before plugging in the grinder-
doser, make sure the voltage and
frequency values of the supply
mains correspond to the ratings
indicated on the label featuring
the grinder- doser technical data.
• The wall socket must be fitted
with an efficient earth contact.
Consequently, it is essential to
make sure the earth system is
efficient and in conformity with
current safety regulations. If in any
doubt, have the system thoroughly
checked by personnel with the
appropriate professional skills.
• It is compulsory to earth the
grinder-doser. The manufacturer
cannot be held responsible in the
event of non-observance of this
regulation.
• It is essential to make sure the
ratings of the system are suitable
for the power absorbed by the
grinder-doser (as indicated on
the label featuring the technical
data) and that the wall socket is
protected against over currents.
• Do not use extension cables, plug
adapters for multiple sockets or
makeshift connections.
• The motor must rotate clockwise. If
the rotation of three phase motors
is to be inverted,by inverting the
two power supply wires inside the
plug, this must be carried out by
skilled personnel.
OPERATING THE GRINDER-DOSER
Preliminaries
Make sure the hopper is positioned
correctly on the coffee grinder-doser
and is fastened to the upper grinding
blade holder by means of the relevant
screw. Close the locking slide and fill
the hopper with coffee beans. Open
the locking slide so that the beans
are allowed to drop into the grinding
system.
Switching on and off
On: set the switch to 1.
Off: set the switch to 0.
LED indicator light
Off: grinder off.
On: grinder on.
Flashing: the grinder is grinding (the
motor is working).
Selection buttons
The control panel has three blue LED
buttons for selecting the quantity
required for grinding. When pressed,
an acoustic sound is released: