Sanremo Stardust SR64OD, Instruction Booklet

Page: 13 / 25

24
ENGLISH
SR64OD - SR83OD
grinder-doser using the On-Off switch,
unplug it from the mains, and contact
skilled technical personnel. Never
perform any work on the grinder-
doser while it is attached to the mains,
in order to prevent the motor from
turning on suddenly. If the grinder-
doser overheats as a result of the
motor stopping, allow the grinder-
doser to cool down before performing
any repair work.
Adjustment disk lock
In order to prevent the adjustment
disk from being removed, which would
make the rotating parts accessible,
there is an anti-unscrewing adjustment
disk lock (safe) positioned under the
adjustment disk.
Coffee outlet guard
The coffee outlet guard must always
be fixed to the doser unit using the
relevant screws, which must never be
removed by the user. The removal of
the coffee outlet guard can be done
by skilled technical personnel only
after disconnecting the grinder-doser
from the power supply by unplugging.
Before reconnecting the grinder-doser
to the power supply, replace the safety
device.
NOISE LEVEL
EEC Countries - The maximum noise
emission of our coffee grinders and
grinders/dosers measured in UNI
EN ISO 3741 reverberating chamber
in compliance with the EN 60704-1
regulations, is compliant with the EN
60704-1 : 1998 and EN 607043 : 1996
regulations. The equivalent level of
noise exposure of a worker, exclusively
related to limit of 240 min. per eight
hours of use of the appliance, is
equal to 78 dB(A), in compliance with
ED 86/188/EEC and ED 200311 0/
EEC. Therefore, when operating the
appliance, no provisions need to be
taken in order to prevent such risks
arising from noise exposure in the
workplace (articles 3-8 of ED 2003/10/
EEC).
MAINTENANCE
It is essential to periodically check the
state of the supply cable and plug.
In the event the supply cable or plug
are damaged, call in skilled technical
personnel to replace them, in order
to prevent any risk. In CE-certified
appliances a special tool is required to
open the base plate to access the cable.
We recommend using original spare
parts only. In order to assure the lasting
efficiency of the appliance, skilled
technical personnel must be called in
to perform periodical maintenance,
including detailed checks of the state
of those components subject to wear.
The state of the grinding blades must
be checked periodically. Keeping the
grinding blades in an excellent state
assures high-quality grinding, resulting
in greater productivity and limited