ENGLISH
– ENGLISH – ENGLISH – ENGLISH – ENGLISH – ENGLISH – ENGLISH – ENGLISH
10/
14
Step 7:
Please measure 500MM at the front corner
of the cabin as the Start Point for installation
of the heater by using the measuring tape. Notice
：
1. Please connect the wire connector
of the cabin with the connector of the heater
and the ground power wire. Then, sort out all
the wires of the cabin and fixed them on the
side walls. Please make sure the outer hull
of the heater not connect with the wires.
2. Please install the outer hull of the heater on
the wall with the silicon cushion and fasten it with screws
3. Please the heater is level the 90deg corner or else it
can not install the safety guard well
Step 8:
Install the Roof on the cabin
with the sunk screw (5×60) and adjust it.
Step 9:
Open the glass door and install the handle
The connection between power source and the heater
Check the mark and connect
