How to use the machine
1.Before use, wash the accessories by clean water, and then dry.
2.Place the machine on a flat, clean and dry table. Press the head of the machine by left hand,
and turn down the lifting knob by right hand (2) Step1. The upper body will lift up automatically.
(PG 1 & 2).
3. Install the pot cover into the stirring end Step2. of the machine as per Pg2
4. Weigh the food and water to be processed into the mixing bowl, then assemble the mixing
bowl (4) on the machine step 3, rotate clockwise until the buckle is screwed in and locked
step 4; (Pg3)
5.Do not exceed the amount of dough - the total weight can hold up to 1.5kg;
6.Install the required accessories (5), (6) and (7) (only one of the three can be used at a time)
onto the head mixing output shaft (1) step 5, push the accessories to the top, and then turn a
quarter turn counterclockwise to the locking position step 6; (PG4&5)
7.Press the head of the machine, the machine will automatically lock the head. Lifting button
(2) step 7, which is in the horizontal position; (Pg6).
8.Control speed knob (3) to the position of 0 to make the appliance stop. And then plug in the
plug and turn on the power switch.
9.Control speed knob (3) to the required speed - start mixing;
10.After the dough meets the requirements, turn the speed knob (3) back to gear 0 to finish.
11.Press the head of the machine by hand, rotate the lifting knob (2) clockwise, lift the upper
body, rotate the mixing bowl counterclockwise, remove the mixing bowl and take out the dough.
3
