10 /
Operator’s Manual Sanli GTS43
3.
Usage Guidelines
Making modifications to the brush cutter and/or using non-genuine parts that
have not been authorised by SANLI UK can render the machine dangerous and
may lead to serious injuries during use. SANLI UK cannot accept any liability for
any type of misuse or for any use which does not conform to this instruction
manual or to current regulations.
WARNING:
All cleaning, transport and maintenance operations must be
carried out with the engine turned off and the Start/Stop switch in the STOP
position.
3.1
Preparing the brush cutter for work
WARNING:
Do not use the hedge trimmer without having fully assembled it first
and made sure that all parts are in place and correctly tightened!
3.11 Assembling the brush cutter
Unpack and inspect all of the parts carefully and make sure that no parts are
missing, bent or damaged. Check that all parts function properly.
Assembling the handlebar
Attach the handlebar to the brush cutter’s main shaft, positioning the handles
accordingly to suit a right or left-handed user (see figs. 1 and 2). Insert and tighten
in the handle’s four fixing screws (fig. 3).
The operator control handle (B, fig. 4) should be
positioned so that the throttle trigger (C) is facing the
direction of cut and can be applied comfortably using
the index finger.
If necessary, the handle can be turned through 180
deg by removing the screw (A, fig. 4).
Having rotated the control handle, replace and
tighten screw (A).
Handle position for Four handle fixing screws A B
left-handed users
Handle position for right-
handed users
a
n
d
l
e
p
o
s
i
t
i
o
n
f
o
r
