16 / 32
8.
Operation and Amplitude Adjustment Method
U100
io01
0.
0.
A
n
0.0
Func key
Freq
▲▼
keys
Set key
※Next, go to <③
Parameter setting>.
Program version
“io” mode
Initial screen:
Output%
①
Power ON
②
Switching from the
operation mode to the
adjustment mode
The following are displayed in this order:
(Each 2 seconds)
AUTO lamp goes out, and the mode
is switched to the adjustment mode.
<Adjustment mode>
⇒
In this mode, the frequency and the output%
can be adjusted, and all parameters can be set
and changed.
①
Data display area
②
Frequency pilot lamp
③
Voltage% pilot lamp
④
Operation pilot lamp
⑤
Parameter pilot lamp
⑥
Operation mode pilot lamp
⑦
Constant amplitude control
pilot lamp
⑧
Frequency lock pilot lamp
⑨
Operation pattern setting
：
ON
：
Blinking
：
OFF
<Lamp status>
(A) ON/OFF key
(B) Func key
(C) Set key
(D) Vol
▲
key
(E) Vol
▼
key
(F) Freq
▲
key
(G) Freq
▼
key
Operation panel
