12
7. Operation
Gently press your back against the massage device to start with. Then make sure that you are in a comfort-
able position before gradually shifting your weight onto the massage device.The massage must be pleasant
and relaxing at all times. Stop the massage or change your position or the contact pressure if you find it is
painful or unpleasant.
• Do not force any part of your body, in particular your fingers, between the rotating massage heads and
their mountings in the device.
•
Sit comfortably and upright on the seat cover. Ensure you sit centered and such that the massage heads
can move to the left and right of your spinal column.
• Switch on the massage device with the button. Select the region you wish to massage with the A + B,
A, B button.
A + B = Entire back
A =
Upper
back
B =
Lower
back
The LED lamp indicates the massage region set.
• The Shiatsu massage unit with rotating massage heads slowly moves upwards from the starting position
in the lowest region of the back and moves up and down in the massage region set. Application only at a
single point is not possible, as the rotational movement and the displacement up and down are coupled.
• Do not use the massage device for longer than 15 minutes. The massage can be finished at any time by
pressing the button. Please note that on switching off, the Shiatsu massage unit firstly returns to the
starting position at the lowest region of the back. This is indicated by the LED blinking. Never interrupt
the return to the starting position. Once this position is attained, the device switches off.
• Do not disconnect the device from the mains supply during operation. Always switch it off only once it has
reached the starting position at the bottom.
• Do not use the massage device for longer than 15 minutes and then allow it to cool. Using the device for
longer can over-stimulate the muscles and cause tension instead of relaxation.
8. Care and storage
CLEANING
WARNING
• Switch the device off and disconnect the power supply after every use and before every clean-
ing.
• Only clean the appliance in the manner specified. Fluid must never be allowed to enter into the
device or accessories.
• Smaller stains can be removed using a cloth or moist sponge together with a little liquid detergent
for delicate fabrics if necessary. Do not use any cleaning agents containing solvents.
• The removable cover is machine-washable at 30 °C. Please follow the cleaning and care symbols
on the label which is sewn into the cover.
• Do not use the device again until it is completely dry.
Storage
If you do not use the device for longer periods, we recommend storing it in the original packaging in a dry
place without weighting it down.
CAUTION
If you use the screw for transport locking, take care when using the device again that it is definitely
removed before switching on.
Summary of Contents for SMG 185
