Sanitas SBM 52, Instructions For Use Manual

Page: 16 / 32

16
Selecting memory
Voice output when voice function
is active
User memor
y
• Switch on the device with the Start/stop button.
When the device is switched off, the time and date are perma-
nently displayed.
The device is ready for use.
You may start measuring.
• Select the desired user memory by pressing the function buttons .
User memory 1
User memory 2
User memory 3
User memory 4
You have 4 memories, each with 30 memory spaces to store the
measurements of 4 different people separately.
Performing the blood pressure measurement
Voice output when voice function
is active
Measur
ement
• As described before, attach the cuff and adopt the posture in
which you want to perform the measurement.
• Switch on the device with the Start/stop button.
• A display check is performed, during which all display segments light up.
• Start the device with the Start/stop
button. The memory space
that will be used is displayed.
The device is ready for use.
You may start measuring.
• The cuff is inflated to 180 mmHg. The cuff’s air pressure is slowly
released. If a tendency for high blood pressure is already recog-
nised, the cuff is reinflated and the cuff’s pressure is increased
again. As soon as a pulse is detected, the
symbol flashes.
Measuring can be cancelled at any time by pressing the Start/
stop button .
• Systolic pressure, diastolic pressure and pulse measurements are
displayed.
Systole ... mmHg
Diastole ... mmHg
Heart rate ... beats per minute
According to the WHO guide-
lines your blood pressure is
– optimal
– normal
– high to normal
– shows slight hypertension
– shows medium hypertension
– shows strong hypertension
Whilst the message is being displayed, the volume can be ad-
justed with the function buttons .
• appears if the measurement could not be performed properly.
Observe the chapter on error messages/trouble-shooting in these
instructions for use and repeat the measurement.
• The measurement is automatically stored.
• The device switches off automatically after 1 minute.
Wait at least 5 minutes before performing another measurement!