26
Measurement
inaccuracy
Max. permissible standard deviation
according to clinical testing:
systolic 8 mmHg /diastolic 8 mmHg
Memory
2 x 60 memory spaces
Dimensions
L 100 mm x W 150 mm x H 58 mm
Weight
Approx. 475 g (without batteries)
Cuff size
22 to 30 cm
Permissible operating
conditions
+5 °C to +40 °C, ≤90 % relative air
humidity (non-condensing)
Permissible storage
conditions
-20 °C to +55 °C, ≤95 % relative air
humidity, 800 –1050 hPa ambient
pressure
Power supply
4 x 1,5 V
AA batteries
Battery life
For approx. 500 measurements, de-
pending on the blood pressure level
and/or pump pressure
Accessories
Instruction for use, 4 x 1.5 V AA bat-
teries, storage pouch
Classification
Internal supply, IPX0, no AP or APG,
continuous operation, type BF ap-
plied part
Technical information is subject to change without notifica-
tion to allow for updates.
• This unit is in line with European Standard EN 60601-1-2
and is subject to particular precautions with regard to
electromagnetic compatibility (EMC). Please note that
portable and mobile HF communication systems may in-
terfere with this unit. More details can be requested from
the stated Customer Service address or found at the end
of the instructions for use.
• This device is in line with the EU Medical Devices Direc-
tive 93/42/EC, the “Medizinproduktegesetz” (German
Medical Devices Act) and the standards EN 1060-1 (non-
invasive sphygmomanometers, Part 1: General require-
ments), EN 1060-3 (non-invasive sphygmomanometers,
Part 3: Supplementary requirements for electro-mechan-
ical blood pressure measuring systems) and IEC 80601-
2-30 (Medical electrical equipment – Part 2 – 30: Particular
requirements for the safety and essential performance of
automated non-invasive blood pressure monitors).
• The accuracy of this blood pressure monitor has been
carefully checked and developed with regard to a long
useful life. If using the device for commercial medical pur-
poses, it must be regularly tested for accuracy by appro-
priate means. Precise instructions for checking accuracy
may be requested from the service address.
