Sanitas SBC 53, Instructions For Use Manual

Page: 33 / 96

33
Deleting individual measur
ements
To clear individual measurements from the relevant user
memory, you must first select a user memory.
• Start the retrieval of the individual measured values.
• Press and hold the memory button
M1 or M2 for 5
seconds (depending on the user memory you are in).
• The selected value is deleted. The device briefly dis-
plays
CL 00
.
• If you would like to delete other values, repeat the pro-
cess described above.
You can switch off the device at any time by pressing the
START/STOP button.
Transfer via Bluetooth
®
Smart
It is also possible to transfer the measured values saved on the
device to your smartphone using Bluetooth
®
Smart.
You will need the HealthCoach app for this. The app is availa-
ble from the App Store.
Proceed as follows to transfer values:
If Bluetooth
®
is activated in the settings menu, the data is
transferred automatically after the measurement. The symbol
appears in the top left of the display (see chapter 4 „Preparing
the measurement“).
Step 1: SBC 53
Activate Bluetooth
®
on your device (see
chapter 4 "Preparing the measurement“, Blue-
tooth
®
).
Step 2: "HealthCoach" app
In the HealthCoach app, add the SBC 53 under
"Settings/My devices".
Step 3: SBC 53
take a measurement.