Sanitaire SC5800 Series Owner'S Manual Download Page 9

Page: 9 / 12

ROUTINE MAINTENANCE

(continued)

Pre-Motor

Filter

Pre-Motor Filter

Check the pre-motor filter each time the dust cup is emptied.

Clean or replace as needed.

To Clean Pre-Motor Filter

1. Remove filter centered in the bottom of the dust cup

compartment.

2. Shake filter to remove excess dust. If necessary, the filter

can be cleaned by vacuuming with another cleaner or

washing with mild detergent.

3. Reinstall filter after completely dry.

Use replacement pre-motor filter, Part No. 71480.

Filter Door Latch

True HEPA Cartridge

Latch

Models equipped with Cartridge Filter

(

Only

cartridge style filters can be used with these models.)
Check the True HEPA filter each time dust cup is emptied.

Replace twice a year or as needed.

To remove True HEPA

cartridge

filter

1. Push down on filter door latch and pull door away from

cleaner.

2. Push down on HEPA cartridge latch and remove filter.

To replace True HEPA

cartridge

filter

1. Place bottom tabs of filter cartridge into slots. Rotate

filter toward cleaner, press firmly against cleaner to latch.

Make sure True HEPA cartridge latch is secured on

both sides.

2. Replace filter door by placing tabs of door into slots on

cleaner. Rotate door up and against cleaner until it locks

into place.

NOTE: To have the benefit of a sealed True HEPA system,

you must use one of the True HEPA

cartridge

filter

systems.

Use replacement True HEPA filter, HF5.

PERIODIC MAINTENANCE

How To Change Light Bulb

(Only for models with

a headlight)

NOTE: Turn off the power switch and disconnect the

electrical cord before changing light bulb.

1. Lower handle. Remove the screw from lens cover.

2. Pull lens cover from cleaner.

3. Pull old light bulb out of socket.

4. Push new light bulb into socket.

5. Replace lens cover.

6. Secure with screw.

Use replacement light bulb,

Part No. 57940-2.

How To Clean Filters

1. Remove from cleaner.

2. To remove debris, tap filter against waste container or

brush off. You may also vacuum the filter using a different

cleaner. If filter needs further cleaning, wash under warm

runninig water.

When all parts are completely dry

, follow the above

steps in reverse to reassemble.

NOTE: Do not put any parts in a dishwasher.

NOTE: Your washable filter may need to be replaced if

cleaning it does not restore cleaning performance.

Summary of Contents for SC5800 Series













Search results

Summary of Contents for SC5800 Series

Reviews:

Related manuals for SC5800 Series

Brands by name

Popular brands

Sanitaire SC5800 Series, Owner'S Manual

Search results

Summary of Contents for SC5800 Series

Reviews:

Related manuals for SC5800 Series

Brands by name

Popular brands