background image

ROUTINE MAINTENANCE

The instructions in this booklet serve as a guide to routine 

maintenance.  To  avoid  unnecessary  service  calls,  check 

the  dust cup, filters, belt, and brush roll often. We suggest 

emptying the dust cup after every use.

NOTE:  When vacuuming carpet fresheners or cleaners, 

powder, plaster dust, or similar fine substances, 

the  dust  cup  and  filters  will  require  more 

frequent maintenance.

NOTE:   Turn  off  the  switch  and  unplug  the  electrical 

cord before changing the filter. Never operate 

the vacuum cleaner without the dust cup or filter 

assembly in place.

Emptying the Dust Cup:

1.  Remove  dust  cup  by  pulling  latch  upward  and  pivoting 

dust cup out and away from cleaner. 

2.  Grasp dust cup lid and twist counterclockwise to remove.

3.  Lift filter up and out of dust cup with a twisting motion.

4.  Dump debris in a waste container.

3.  To replace dust cup, position dust cup with handle 

facing inside the dust cup compartment; place bottom 

of  dust  cup  in  bottom  of  compartment  and  rotate 

upward,  pushing  dust  cup  against  cleaner  until  it 

locks into place.

1.  Replace filter onto center tube in dust cup applying 

gentle pressure. 

2.  Line  up  tabs  on  dust  cup  with 

openings on lid, rotate lid clockwise 

while applying pressure to secure. 

The lock symbol (   ) on lid will be 

centered over dust cup handle when 

properly assembled.

Reinstalling the Dust Cup:

Instructions to Clean or Change Dust Cup Filter, 

Style DCF3

Check and clean the filter frequently to maintain 

good performance.

To clean the Filter, Dust Cup and Dust Cup Lid:

1.  To remove debris, tap filter against waste container and/

or brush with dusting brush accessory tool. You may also 

vacuum the filter using a different cleaner.

2.  If filter needs further cleaning, wash in warm water using 

a mild detergent. To clean between filter pleats, fan open 

under running water.

3.  If dust cup needs cleaning, wash in warm water using a 

mild  detergent. 

Do  not  submerge  dust  cup  lid,  wipe 

only with a damp cloth.

4.

  When all parts are completely dry

, replace filter in dust 

cup and replace lid.

NOTE:  These parts  are not dishwasher safe.

NOTE:  Your dust cup filter may need to be replaced 

if  cleaning  it  does  not  restore  cleaning 

performance.

8

Summary of Contents for SC5800 Series













Reviews: