background image

OBTAINING WARRANTY SERVICE

To obtain warranty service you must return the defective cleaner or cleaner

part along with proof of purchase to any Eureka/Sanitaire Authorized Warranty
Station. You will find the nearest location in the Yellow Pages under “Vacuum
Cleaners–Service and Repair”. Be certain that the Warranty Station is “Eureka/
Sanitaire Authorized”.

For the location of the nearest Eureka/Sanitaire Authorized Warranty Station

or for service information, telephone toll free:

USA:  1-800-282-2886

Mexico: 5670-6169

Canada:  1-800-282-2886

If you prefer, you can write to:

In Canada write to:

The Eureka Company

The Eureka Company

Service Division

866 Langs Drive

807 North Main Street

Cambridge, Ontario N3H 2N7

Bloomington, IL 61701

If it is necessary to ship the cleaner outside your community to obtain warranty

repair, you must pay the shipping charges to the Eureka/Sanitaire Authorized
Warranty Station. Return shipping charges will be paid by the Warranty Station.
When returning parts for repair, please include the model, type, and serial
numbers from the data plate on the cleaner.

FURTHER LIMITATIONS AND EXCLUSIONS

Any warranty that may be implied in connection with your purchase or use of

the cleaner, including any warranty of MERCHANTABILITY or any warranty
for FITNESS FOR A PARTICULAR PURPOSE is limited to the duration of this
warranty. Some states do not allow limitations on how long an implied warranty
lasts, so the above limitations may not apply to you.

Your relief for the breach of this warranty is limited to the relief expressly

provided above. IN NO EVENT SHALL EUREKA BE LIABLE FOR ANY
CONSEQUENTIAL OR INCIDENTAL DAMAGES THAT YOU MAY INCUR IN
CONNECTION WITH YOUR PURCHASE OR USE OF THE CLEANER. Some
states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you.

This warranty gives you specific legal rights. You may also have other rights

which vary by State.

THE EUREKA COMPANY

Bloomington, Illinois 61701

©2003 White Consolidated, Ltd.

Printed in U.S.A.

(72660)

Part No. 72926 

(03/03)

Summary of Contents for 680 Series

















Reviews: