Sanipex AQUAECO AQE-DIP-3N1-CP, Installation Manual

Page: 6 / 12

Washbasin Mixer
Installation Method:
1. Mounting stud into the mixer body base,
and then tighten it.
Before installation, clean out dirt or other impurities, which may
collect in water pipes by allowing water to flow freely for a moment.
1
2
3
4
2. Insert the inlet flexible hose into the basin
hole. Position the mixer. From underside of the
basin, fit the deck plate on the mounting
stud, and secure the mixer with the nut.
3. Take away the drain plug protector; install
the pop-up set into the drain opening and
tighten the mounting nut.
4. Connect the lift rod, pop-up set and installed
mixer body by pivot rod.
HOT
COLD