Sanipex AQUAECO AQE-DIP-3N1-CP, Installation Manual

Page: 9 / 12

Bath Mixer
Installation Method:
Before installation, clean out dirt or other impurities, which may
collect in water pipes by allowing water to flow freely for a moment.
1. Install the two offset connectors into the hot
and cold supply pipes.
2. Thread the escutcheon onto the offset
connectors so that the escutcheon contacts
the finished wall. Insert washer into mixer body,
supply nuts. Thread the supply nuts onto the
connectors and tighten them.
3. Washer provided with hose must be installed
in each end. Connect shower hose to mixer and
hand shower.
4. Drill two holes in the finished wall and then
tighten screws to secure bracket on the
finished wall.
1
2
3
4