12. Norms
The unit conforms with EN 12050-2 waste water lifting plant.
SANISPEED®
Société Française d’Assainissement
EN 12050-2
FF02-V45
220 - 240 V - 50 Hz - 400 W - IP44 2A - 6,4 KG
13. Care and use
The Sanispeed is designed to handle the waste evacuation from a bath, kitchen sink, dishwasher and washing machine - in a light commercial
situation. Its powerful pump will deal with every day normal usage.
Warning
: Do not dispose of solvents, paints (do not wash paint brushes in sink), caustic, acid or other chemicals into these products.
Depending on usage, the unit may need to be cleaned from time to time. Heavy usage can result in a build up of fat and grease.
The unit will pump away water as hot as 90°C for 5 minutes (i.e. to clear the hottest waste water from a washing machine). However, do not pour
boiling water directly into the unit.
When pumping very hot water for a prolonged period of time, the unit will automatically cut out to protect the motor (thermal cut-out). When
this happens the unit will shut down long enough to cool down (approx.1 hour) and automatically resume normal operation when ready.
14. Dismantling
Disconnect from the power supply before attempting any work on the unit.
The unit does not require any specific maintenance.
In case of a service requirement, please call the Saniflo service engineer, especially for any electrical work.
15. Guarantee
2 years guarantee as from its date of purchase subject to correct installation and correct use.
11. Electrical connection
The electrical installation should be carried out by a qualified person.
All wiring must conform to BS7671, 1992 requirements for electrical installations. The Sanispeed requires a
220/240V single phase AC 50 Hz supply (UK specification). Do not connect the Sanispeed to a conventional plug
and socket. It must be wired into a fused, unswitched, fixed wiring connector fitted with a 5 amp fuse. The
Sanispeed has an earth wire. The wires in the mains lead are coloured in accordance with the following code:
Brown – Live Blue – Neutral Green/Yellow – Earth
Warning:
Ensure the electricity is turned OFF at the main switchboard before wiring to connector.
All work on cable, pressure chamber and motor should only be carried out by a qualified Saniflo servicing agent,
as special tools are required.
UK – 230/240V 50Hz.
The unit should be installed so it is easily accessible/removable for possible maintenance.
The unit should not be exposed to splashing in normal use.
CANADA
USA
EUR
CH
GB
Summary of Contents for SANISPEED
Page 6: ...16 Parts ...
