Activate your Deployment to license PBXact
Once the install process is complete, locate your Deployment ID number from the Sangoma
or from your Invoice, and issue the
following command:
fwconsole sysadmin activate XXXX (Replacing XXX with your deployment ID)
The activation process will install additional RPMs, and make the necessary changes to the GUI behind the scenes. The end result is a
complete new PBXact system. This process takes about 3-4 minutes.
When completed you can run the following End of Line testing and all checks should come back Passed. If you have any failed checks
wait 5 minutes and run again. If you still have failed checks please open a support ticket
fwconsole sa eol
