The bracket assembly for use with a 23" rack includes front and rear mounting options for added stability. When installing IMG into a 23" rack, the
front and rear brackets are required. As explained above, for the IMG 1010 to be NEBS Level 3 compliant in a 23" rack, both the front and rear
bracket assemblies must be used. See diagram Below
Installation
Remove existing 19" brackets from front mounting position.
Replace with 23" brackets, re-using existing screws.
Attach Rear Bracket Mounts to chassis as shown in figure.
Attach 23" brackets to the Bracket Mounts using screws provided.
