11
GB
2.
Simply press and release one of the radio’s
Preset
buttons (1-5) in the DAB or FM radio mode to recall the
corresponding preset.
Alternatively, momentarily press the required
Preset
button (1-10) on the remote control. Your radio will
then tune to the station stored in the selected preset
memory. The preset used will be shown at the bottom
of the display screen.
10. Listening to Bluetooth audio
In order to stream Bluetooth music to your radio, you need
to pair your Bluetooth device with the WFT-4. Pairing
creates a ‘bond’ so two devices can recognize each other.
Pairing your Bluetooth device for the first
time
1.
Turn on the radio using the Power button.
2.
Select the Bluetooth mode using the
Mode
button
and
Tuning knop
or using the radio’s Main menu. After
selecting the Bluetooth mode, the radio’s display will
show “No connect”. The Bluetooth icon in the bottom
bar of the radio’s display will blink.
3.
Activate Bluetooth on your Bluetooth device (refer to the
manual of the Bluetooth device if you are unsure about
how to active Bluetooth).
4.
Go to the Bluetooth list on your Bluetooth device and
select the device named “WFT-4” (if you have changed
the name of the radio in the radio’s System settings menu,
search for the name you have given the radio instead).
Note:
On some Bluetooth devices with Bluetooth
version 2.1 or earlier, you might be requested to enter a
passcode. If this is the case, enter the passcode “0000”.
5.
After the devices have paired and connected, the radio’s
display will show the name of the connected Bluetooth
device and the playback status. The Bluetooth icon in
the bottom bar of the radio’s display will stop blinking.
You can now play music on your Bluetooth device.
Notes:
(1)
If 2 Bluetooth devices are pairing for the first time, both
must search for your radio, it will show its availability
on both devices. However, if one device links with this
unit first, then the other Bluetooth device won’t find it
on the list.
(2)
If you take your Bluetooth device out of range, the
connection between your device and the radio will be
temporarily disconnected. Your radio will automatically
reconnect if the Bluetooth device is brought back
into range. Be aware that during the period of
disconnection, no other Bluetooth device can pair or
link with your radio.
(3)
If “WFT-4” shows up in your Bluetooth device list, but
your Bluetooth device cannot connect with it, please
delete the item from your list and pair the Bluetooth
device with the radio again following the steps
described previously.
(4)
The effective operation range between the radio
and the paired Bluetooth device is approximately 10
meters (30 feet). Any obstacle between the system
and the device can reduce the operational range.
(5)
Bluetooth connectivity performance may vary
depending on the connected Bluetooth device. Please
refer to the Bluetooth capabilities of your device before
connecting it to your radio. Not all features may be
supported, depending on the Bluetooth device used.
(6)
With some mobile phones, making / receiving calls, text
messages, e-mails or any other activities unrelated to
audio streaming may mute the Bluetooth audio streaming
or even temporarily disconnect from your device. Such
behavior is a function of the Bluetooth device and does
not indicate a problem with your WFT-4.
Audio playback in the Bluetooth mode
When you have successfully connected your radio with
the chosen Bluetooth device you can start to play your
music using the controls on the radio or your connected
Bluetooth device.
1.
After connecting a Bluetooth device, the playback status
will be displayed at the bottom of the radio’s display.
2.
The volume can be controlled on the external Bluetooth
device.
Playback can be controlled both on the radio and on
the Bluetooth device as well. When using the radio’s
controls:
●
Press the
Play / Pause
button to start audio playback
or to pause / resume playback.
●
Press the
Next
or
Previous
button to go to the next
or previous track.
●
Press and hold the
Next
or
Previous
button to fast
forward or rewind within a track and release the
button when the desired point is reached.
Note:
Not all player applications or devices may respond
to all of these controls.
Audio playback from a previously-paired
Bluetooth device
The WFT-4 can memorize up to 8 sets of paired Bluetooth
devices, when the memory exceed this amount, the
earliest device with which the radio was paired will be
overwritten in the radio’s memory.
If your Bluetooth device has paired with the WFT-4
previously, the radio will still remember your Bluetooth
device and attempt to reconnect with the device that was
last connected. If the last connected Bluetooth device is
not available, the radio will try to connect to the second
last Bluetooth device.
The Bluetooth menu
You can open the Bluetooth menu by pressing the
Menu
button
while the radio is in the Bluetooth mode.
The Bluetooth menu offers the following options:
●
[Forget devices]:
Select this option to clear the list
of devices the radio has previously paired with. If the
radio is currently paired and connected to a device, the
connection will be lost.
●
[System settings]:
Select this option to go to the
System settings menu and configure the radio (refer to
chapter 13 “Using the System settings menu” for details).
