Dynamic Range Control settings
Dynamic Range Control (also known as DRC) can make quieter sounds easier to hear when your
radio is used in a noisy environment by reducing the dynamic range of the audio signal.
From the DAB menu list select
DRC
to enter the DRC adjustment mode. The current DRC setting
will be highlighted on the screen.
Touch the required DRC setting the display will return to the previous screen.
'DRC Off' - DRC is switched off, Broadcast DRC will be ignored.
'DRC high' - DRC is set as sent by broadcaster.
'DRC low' - DRC level is set to 1/2 that sent by broadcaster.
Note: Not all DAB broadcasts use the DRC function. If the broadcast does not provide DRC
information, then the DRC setting in the radio will
have no effect.
Prune invalid stations
If you move to a different part of the country, some of the stations which were listed may no
longer be available. Also, from time to time, some DAB services may stop broadcasting, or may
change location or frequency. Stations which cannot be found, or which have not been received
for a very long time are shown in the station list with a question mark. The Prune stations function
will delete the marked DAB stations from your station list.
From the DAB Menu list select
Prune invalid stations
to cause the invalid stations names to be
removed from the list.
DAB Menu
Scan
Edit favourites
DRC
15:05
26 Jun 2010
Settings
X
DRC
OFF
Low
High
15:05
26 Jun 2010
DAB
DAB Menu
Edit favourites
DRC
Manual tune
Prune invalid stations
15:05
26 Jun 2010
DAB
Summary of Contents for WFT-2D
Page 1: ...GB Version 1 WFT 2D ...