Sangean RCR-9, User Manual

Page: 8 / 36

7
GB
Operating your radio - Search tuning
FM / AM
. Place the wire antenna so that it is as straight as
possible extending either above or below the radio.
. Press the On/Off button to switch on your clock radio.
. Press the Band button to select the FM/AM band.
4. Press and hold the Tuning Up button. Your radio will
scan in an upwards direction (low frequency to high
frequency) and stop automatically when it finds a station
of sufficient strength.
5. After a few seconds the display will update. The display
will show the frequency of the signal found. If the signal
is strong enough and there is RDS data present then
the radio will display the station name.
6. To find other stations, press and hold the Tuning Up
button as before.