08
Press and hold the Power button until you hear a beep to switch on your radio.
Press the Band button to select the desired frequency band. Tune to the required radio station as
previously described.
Press and hold the Preset button until the radio beeps and the preset number flashes on the
display. Rotate the Tuning control knob to select your desired preset number. Press the select
button to confirm the setting. The preset number (e.g.P6) will show on the display. The station will
be stored using the preset number. Repeat this procedure for the remaining presets as you wish.
Preset stations which have already been stored may be overwritten by following the above
procedure if required.
1.
2.
3.
4.
Presetting stations – AM / FM / WX
The radio has 9 memory presets each for AM & FM, and 5 memory presets for the weather band. They
are used in the same way for each frequency band.
Press and hold the Power button until you hear a beep to switch on your radio.
Select the required frequency band by pressing the Band button.
Press the Preset button to tune to one of the stations stored in the preset memory.
1.
2.
3.
Recalling a preset station – FM / AM / WX
Summary of Contents for RCR-29
Page 1: ...Version 1 RCR 29 GB ...
