07
Press and hold the Power button until you hear a beep to switch on your radio.
Press the Band button as needed until the AM or FM band is selected.
To scan up in frequency, first rotate the Tuning control knob in a clockwise direction and then
press the Tuning control button. Your radio will scan in an upwards direction (low frequency to
high frequency) and stop automatically when it finds a station of sufficient strength. To scan down
in frequency, first rotate the Tuning control knob in a anti-clockwise direction and then press the
Tuning control button. Your radio will scan in a downwards direction and stop automatically when it
finds a station of sufficient strength.
After a few seconds the display will update. The display will show the frequency of the signal
found. If the signal is strong enough and there is RDS data present then the radio will display the
station name.
When the end of the frequency band is reached your radio will recommence tuning from the
opposite end of the frequency band.
Use the Volume control to adjust the sound level as needed.
To switch off your radio press and hold the Power button until “OFF” appears on the display.
1.
2.
3.
4.
5.
6.
7.
Operating your radio – Search tuning
AM / FM
Press and hold the Power button until you hear a beep to switch on your radio.
Press the Band button as needed until the AM or FM band is selected.
Rotate the Tuning control knob to tune to a station. The FM frequency will change in steps of
100kHz / 50kHz and AM frequency will change in steps of 10kHz / 9kHz.
When the end of the waveband is reached your radio will recommence tuning from the opposite
end of the frequency band.
Use the Volume control to adjust the sound level as needed.
1.
2.
3.
4.
5.
Manual tuning – AM / FM
If your radio has any interference in the AM band because of its AC adaptor, please move your
radio away from the AC adaptor at least 12”.
NOTE
Summary of Contents for RCR-29
Page 1: ...Version 1 RCR 29 GB ...
