8
GB
Sleep function – Auto Off
The sleep timer will automatically switch off your radio after a preset time has elapsed.
1. Press and continue to hold down the Power button, the display will cycle through the available sleep
times in this order 30-20-10-60-50-40-30………… Release the button when the required sleep time
appears in the display. Display will appear “AUTO OFF” and radio will play the last station selected.
2. To cancel the sleep function, press the Power button, the “AUTO OFF” will disappear and the radio
will switch off.
Nap timer (short timer)
You can set the Nap timer (short timer) when the radio is on or off.
Press and hold the Timer button, the display will appear ( ) and flash last nap timers time. Press the
Tuning Up/Down button to select required nap timers time, press the Timer button again to complete
setting.
Nap timer will start to count by seconds, the display will show ( ) and remaining nap timer time. The
buzzer will sound for 3 minutes when it reaches the period of time which you have set. Press the Power
button to turn the buzzer off.
To turn off the Nap timer before the time is up, press and hold the Timer button again. ( ) will
disappear from display.
You can also set memory for the nap timer’s time by long pressing Preset 1-5 button for the timers time
you require (the same procedure as Storing a station) and recall it whenever you need to set the timer. e.g.
you can store 10 minutes timer in preset 1 and 20 minutes timer in preset 2, so each time after you need
to select short timers time, press and hold the Timer button then press preset 1 button to get 10 minutes
timer and preset 2 button to get 20 minutes timer and so on.
Factory reset
If you wish to completely reset your radio to its initial state this may be performed by following this
procedure. By performing a factory reset, all user entered settings will be erased.
1. Make sure your radio is switched off.
2. Press and hold the Preset button 5 and Band button at the same time for more than 2 seconds, the
“DEF” symbol will appear and flash on the display. Continue holding down these two buttons jointly
until all the icons show on the display. Now the factory reset is completed.
