6
GB
Software version/FM range setting/Setting tuning step
Software version
The software display cannot be altered and is just for your reference.
1. Turn off the radio.
2. Press and hold the STEP button for 2 seconds until the software version number (e.g. P01) is shown
on the display.
FM range setting
The FM Broadcasting Band tuning range can be different depending on where in the world you live. It
may be necessary to adjust the FM range to allow the radio to tune properly.
1. After the software version is shown on the display, continue pressing and holding the STEP button
until the FM range setting (e.g. F00) appears and flashes on the display.
2. Press the Tuning Up/Down button to select the desired FM range and press the STEP button to
confirm the setting.
The available FM range is as following:
F00: 87.5-108 MHz (North America) (default). Your radio is pre-set with this tuning range, no
adjustments are necessary if you live in North America.
F01: 76-90 MHz (for Japan)
F02: 64-108 MHz (for Eastern European countries and Russia)
F03: 76-108 MHz (for some of China area and European countries)
Setting tuning step
1. After the FM range setting is completed, FM tuning step setting will flash on the display (e.g. FM 100).
Press the Tuning Up/Down button to select the desired FM tuning step (50 kHz or 100 kHz) and press
the STEP button to confirm the setting.
2. After the confirmation of FM tuning step, press the Tuning Up/Down button to choose the desired AM
tuning step (9 kHz or 10 kHz) and press the STEP button to confirm the setting.
Note:
The tuning steps for North America are FM: 100 kHz and AM: 10 kHz
The rest of the world is FM: 50 kHz and AM: 9 kHz
Note:
Change in the AM tuning step setting will result in the removal of AM presets stored in the radio, this is
not the case for your FM tuning steps.
