Sangean DT-220V, Operating Instructions Manual

Page: 9 / 26

8
Presetting stations
You may store up to 10 stations each on FM, AM
(MW) and TV bands giving a total of 30 preset
stations.
1. Tune into the required stations using one of the
tuning methods previously described .
2. To store the station, press and hold down one of
the PRESET button 1-5 for more than 2 seconds
until display shows preset location.
3. To store the station into preset 6-10, press +5
button, display will show +5, then press and hold
down one of the PRESET button 1-5 for more than
2 seconds until display shows preset location.
Recalling a preset station
1. Switch on your radio using the Power button.
2. Select the desired waveband using the Band
button.
3. Simply press one of Preset buttons 1-5 to recall
the required preset stations. To recall preset
stations 6-10, press +5 button, then the Preset
button 1-5.
Display modes
Whilst radio is switched on, press Display button to
change between frequency and normal time.