3
Operating your radio - FM
1. Carefully extend the telescopic aerial.
2. Press the On/Off button to switch on your radio. The display will show “Welcome to Digital
Radio” for a few seconds.
3. Press the Band button to select the FM band.
4. Press the Auto tune button. Your radio will scan from the currently displayed frequency
direction upwards and will stop scanning when it finds a station of sufficient strength.
5. The display will show the frequency of the signal which has been found. If RDS information
is available, after a few seconds the display will show the radio station name. The display
will also show “St” and “RDS” on the upper line if the station is received with stereo and
RDS information.
6. Press and hold the Auto tune button to scan the FM band in a downwards direction (high frequency
to low frequency).
7. When the end of the waveband is reached your radio will recommence tuning from the
opposite end of the waveband.
8. Adjust the Volume control to the required setting.
9. To switch off your radio press the On/Off button.
Summary of Contents for DPR-77
Page 1: ......
