GB
8
Scan sensitivity setting - FM
Your radio will normally scan for FM broadcasts which are strong enough to give good
reception. However, you may wish the Auto-scan function to also be able to find weaker
signals, possibly from more distant radio transmitters. Your radio includes a local / distant
option for the Auto-scan function.
. Press the On/Off button to switch on your radio.
2. If needed, press the Band button to select the FM band.
3. Press and hold the Info button until the display shows “Mono override” on the lower line.
4. Press and release the Tuning up or down buttons until the display shows “FM Scan Zone”
then press the Select button to enter the scan zone selection menu.
5. Press the Tuning up or down buttons to switch between Local and Distant options on the
lower line of the display. The Distant option will allow the radio to find weaker signals
when scanning.
6. Press the Select button to confirm your selection. The radio will then revert to the normal
information display. The Local or Distant setting is stored in the radio and remains in force
until changed or until a System Reset.
Note:
The intial setting (out of the box, or after a System Reset) causes the radio to ignore weak
(distant) signals.
Summary of Contents for DPR-67
Page 1: ...Version 1 DPR 67 GB...
