7
Stereo / Mono setting - FM
Your radio will play stereo broadcasts in stereo (via headphones) so long as the received
signal is of adequate strength. However, as a stereo signal becomes weaker the audio sig
-
nal will become poorer.
It may be preferable to force the radio to play the station in mono in order to reduce the level
of audio noise.
. Press the On/Off button to switch on your radio.
. Tune to the required FM radio station as previously described.
3. Press and hold the Info button until the display shows “Mono override” on the lower line.
4. Press the Select button to enter Menu. The lower line of display will show “Override Off“ if
the radio is in the Auto-Stereo mode. Press the Tuning Up or Down button to switch on
the mono override. While this setting is engaged, the radio will play the current station in
mono whether listening via headphones or the loudspeaker.
Mono Overide is a temporary setting and is applied to the currently tuned station only. It is
cancelled automatically by tuning to another radio station.
5. If you wish to cancel Mono-Override while listening to the currently tuned radio station,
press and hold the Info button until the display shows “Mono override“ on the lower line.
Press the Select button to enter the Mono override menu, the lower line will show “Override
On“ if the radio is in the Mono-Override mode.
6. Press the Select button to switch off the Mono-Override. The radio will play then play the
current station in stereo through headphones if the signal is sufficiently strong.
Summary of Contents for DPR-67
Page 1: ...Version 1 DPR 67 GB...
