20
Network remote control options
Network PIN setup (PIN number)
Your radio has the option of being controlled by an application installed on an Apple iPhone, iPod
touch, iPad or equivalent Android device. The PIN number facility allows you to ensure that your
radio can only be controlled by your own device rather than someone else's.
The remote control application is called UNDOK, by Frontier Silicon Limited, and is available from
the Apple App Store and Google Play for your device.
UNDOK will try to use the default PIN of '1234' to control your radio.
You may change the PIN if desired using the 'NetRemote PIN Setup' option in the Network
settings menu. The updated PIN should then be used in the UNDOK app to allow the app to
reconnect to the radio. The app will prompt you for the PIN as needed.
Using an Ethernet connection
If you choose to connect your radio to the network using a wired Ethernet connection, then an
Ethernet cable of the appropriate length will be needed (cable not supplied). The app will offer
you an option to connect using Ethernet during the setup procedure.
1. Connect the Ethernet cable to the RJ45 Ethernet socket on the back of your radio.
2. Select the Ethernet option on the UNDOK app and follow the onscreen guide.
If it is intended to listen to FM radio extensively, then there may be benefit in using a shielded
Ethernet cable since this may reduce possible interference to the radio.
Control via the UNDOK app
Network settings
Network wizard
PBC Wlan setup
View settings
Wlan region
Manual settings
NetRemote PIN Setup
>
Summary of Contents for DDR-75BT
Page 1: ...Version 1 DDR 75BT GB...
