background image

2

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings

4. Follow all instructions

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with
    the instructions.

8. Do not install near any heat such as radiators, heat registers,
    stoves or other apparatus (including amplifiers) that produce heat.

9. Do not defect the safety purpose of the polarized or
    grounding-type plug. A polarized plug has two blades with one wider
    than the other. A grounding type plug has two blades and a third
    grounding prong. The wide blade or the third prong are provided for
    your safety. If the provided plug does not fit into your outlet,
    consult an electrician for replacement of the obsolete outlet - USA
    version only.

10. Protect the power cord from being walked on or pinched particularly
      at plug, convenience receptacle, and the point where they exit from
      the apparatus.

11. Only use the attachments specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by
      the manufacture, or sold with the apparatus. When a cart is used,
      use caution when moving the cart/apparatus combination to avoid
      injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for
      long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is
      required when the apparatus has been damaged in anyway,
      such as power-supply cord or plug is damaged, liquid has been
      spilled or objects have fallen into the apparatus, the apparatus has
      been exposed to rain or moisture, does not operate normally,
      or has been dropped.

15. To reduce the risk or fire electric shock, do not expose this
      appliance to rain or moisture.

16. The shock hazard marking and associated graphical symbol is
      provided on the bottom panel of unit.

17. Apparatus shall not be exposed to dripping or splashing and no
      objects filled with liquids, shall be placed on the apparatus.

18. For outdoors use, to avoid electric shock, use battery only during a
      raining day or the weather is wet.

GB

Summary of Contents for DAB+BOX
























Reviews: