7
Installation Plan A
Receiver’s
position
Router’s
position
Boiler
TH TH
Boiler
LS LR
Boiler
Wa
!
Our products are designed to comply with the recommended codes of practice and is to be installed
and serviced by competent persons in accordance with the relevant wiring regulations.
Warning: Before any installation or maintenance, ensure that the electrical supply is switched off at
the breaker.
The receiver needs to be installed in the boilers vicinity, and within the desired wireless networks signal area.
The Thermostat can be installed anywhere within range of the receiver.
Note: Distance between thermostat and receiver cannot be greater than 100m (open field).
1. Install receiver on the wall
1. Open backplate from the top
2. Install the backplate
onto the wall.
3. Clip the receiver
onto the backplate
4. Complete
2. Installation Plan A Wiring
Black & Grey
Control Cables
Black & Grey
Control Cables
Brown & Blue Power
Supply Cables
Brown & Blue Power
Supply Cables
1. Potential Free Relay
2. 230V Relay
Boiler type
selection;
The Thermostats
output between
N/C
&
N/O
,
Typically N/O
Boiler type
selection;
This boiler type
can only be N/O
