4. On the Thermostat:
Press the “ ” to enter pairing mode,
it will display “ ”, and the icon “ ”
will be flashing.
5. If pairing is successful, the
Thermostat will display “ ”, and the
“ ” icon will now constantly display,
and then will automatically go back into
the OFF interface.
2. On the Thermostat
when in “Standby”
mode, press and hold
“ ” for 3s.
1. Press “ ” to turn off the receiver,
when in the OFF condition, press and
hold the “ ” button for at least 3
seconds, the LED will now illuminate
yellow constantly.
3. The Thermostat will then show “ ”.
9
Pairing the Thermostat and Receiver
The LED will
stay illuminat-
ed yellow
As default, the Thermostat & Receiver are pre-paired
