SANEI ELECTRIC SK1-211, Technical Manual

Page: 47 / 56

（ 5 ） Label specifications
SK1-31 prints label paper with black marks and without black marks.
Use label paper complying with the following conditions.
Item No black mark With black mark
Recommendable media
HW76B
（
Nippon Paper Ind.
）
Length: 94µm
Thickness of base paper:
60µm
Color on base paper: White
Total thickness: 154µm or less
（ incl. adhesive ）
Roll diameter Φ 120mm or less
Label core
Φ 25.4
（
Internal dia.
）
× Φ 31.4
（
External dia.
）
mm
Base paper width
57.5±0.5mm
／
59.5±0.5mm
／
79.5±0.5mm
Label width
54±0.5mm ／ 56±0.5mm ／ 76±0.5mm
Length 25 to 350mm
Label gap 3 to 6mm 0 to 6mm
Rolling up direction Label surface is outside of a roll
Black mark size
−
Width ： 12mm or more
Length
：
3 to 6mm
Density of black mark
−
Ink
：
Reflective ratio should be
7
％
or less.
４７
SK1-211/311
Label pitch
L1+L2
Label length (L1)
25 to 350
Label gap (L2)
3 to 6mm
Black mark
（
Reverse side
）
12 or more
4〜6
Front
（
Label surface
）
1.75 or more 1.75 or more
Paper feed
12 or more
Paper feed
Black mark position
Note2,3
（ Unit ： mm ）
Note 1. Above illustration shows the paper width 80.0mm..
Note 2. The position of black mark is decided by that of black mark.
Note 3. When 58mm
／
60mm width paper is used, the black mark sensor must be installed on left side.